Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
USING THE MEMORIZED PRESETS
The gun has up to 10 user memorized presets that can be
reused for quicker access to the most commonly used
presets. These presets are numbered from 0 to 9.
To select these predefined presets follow the process below:
NOTE: Before activating the preset mode, make sure the
trigger is not pulled.
1. Press the SELECT button. The display shows the preset
number 1 (fig 4).
2. Press SELECT again if you want to select another one of
the preset positions. The display will show the stored
values from PR1 to PR5. After displaying the preset
PR-5, the display returns to the initial mode.
3. Once the desired preset position is displayed press the
AUTO button. From this point on, the operation will be
identical to that described at the beginning of
"Operation" section.
Refer to the "Setting up memorized presets" section of the
configuration menu for help on saving presets.
CONFIGURATION MENU
This gun allows the following settings::
- Set predefined values of most used presets.
- Setting of valve closing anticipation
- Setting of units of measurement
- AUTORESET mode: if set to "YES", once a preset is finished,
the counter is reset after a few minutes.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Fig. 4
R. 03/22 896 846
EN
5
Werbung
