Werbung
Internal ports and connectors
The positions of the internal ports and connectors are shown on the Cover. Additional information on
some ports is also provided here.
Hard disk connection
An ultra ATA/66, ultra ATA/100 or ultra ATA/133 hard disk must be connected with a cable
especially designed for the ultra ATA/66, ultra ATA/100 or ultra ATA/133 mode.
Ê
Connect the end of the cable marked with blue to the mainboard.
Pin assignment of internal ports
The pin assignment of some internal connections is shown in English in the following.
i
Some of the following connectors may be optional!
Front panel
Watch the poling of the LEDs. The positive pole of
the connection cables is often indicated with a
coloured wire.
Connection
Reset
Power On/Off
HD LED
Power On LED
Indicates the system state APM or ACPI (see chapter "APM and ACPI system
status, energy-saving modes").
A26361-D1555-Z121-2-6319
Internal ports and connectors
Power On/Off
1)
HD-LED
1)
Reset
Note
Power On
LED 1) 3)
1
2
English - 9
Werbung
