Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety and operating instructions
• Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
• Disconnect battery pack from tool before making any adjustments, changing
accessories, or storing the tool.
• Handle battery packs correctly. Ensure that the outside surface of battery
pack or tool is clean and dry before plugging into charger. Do not dispose of
used battery packs in the general refuse or by burning them. Disposal ac-
cording to local regulations. Never break open battery packs and chargers
and store only in dry rooms. Keep dry at all times.
• Battery machines give freedom from cable or hose but have a limited
power- and energy capacity.
• For proper reference between product and instruction, note the Tool serial
numbers here:
General information
EC DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, S-105 23 STOCKHOLM SWEDEN
declare under our sole responsibility that our product (with type and serial num-
ber, see front page) and in combination with our accessories, to which this dec-
laration relates is in conformity with the appropriate standard(s):
EN 300328:2012, EN 301489-17:2012, EN 301893:2012, EN 60745-1:2009
A11:2010, EN 60745-2-2:2010, EN 61000-6-2:2005, EN 61000-6-4:2007, EN
50581:2012
and in accordance with the following directive(s):
2014/53/EU, 2014/30/EU, 2006/42/EC, 2011/65/EU
Technical file available from:
Quality Manager, Atlas Copco Tools, Stockholm, Sweden
FCC and IC compliance
This device contains
FCC ID: PVH090802
IC: 5325A-090802
This device complies with Part 15 of the FCC Rules. Any changes or modifica-
tions not expressly approved by the manufacturer could void the user's author-
ity to operate this device.
Operation is subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
4
EN
© Atlas Copco Industrial Technique AB - 9836 894900 00
ETV STB63-100-13-IRC-W
Werbung
