Milwaukee M18 FVP5 Originalbetriebsanleitung Seite 15

4
3
2
1
10
1 Oil level window
2 Oil fi ll cap
3 Gas ballast valve
4 Carry handle
5 Intake fi ttings
6 Low battery indicaton LED
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
This appliance can be used by
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Remove the battery pack before
starting any work on the machine. Do
not dispose of used battery packs in
the household refuse or by burning
them. Milwaukee Distributors offer to
retrieve old batteries to protect our
environment. Do not store the battery
pack together with metal objects (short
circuit risk). Use only System M18
chargers for charging System M18
battery packs. Do not use battery packs
from other systems.
Battery acid may leak from damaged
batteries under extreme load or
extreme temperatures. In case of
contact with battery acid wash it off
2023_09_01 4931425904_M18FVP5_2-0.indd 15 2023_09_01 4931425904_M18FVP5_2-0.indd 15
5
6
7
8
9
7 On/Off switch
8 Manifold mode button
9 Isolation valve
10 Oil drain
English
immediately with soap and water. In
case of eye contact rinse thoroughly
for at least 10 minutes and immediately
seek medical attention.
• Do not force the pump. Use the correct pump for your
application. The correct pump will do the job better and safer at
the rate for which it was designed.
• Always remove the battery pack any time the tool is not
in use. Always remove battery pack from the pump before
making any adjustments, changing accesories, or storing
appliance. Such preventive safety measures reduce the risk of
starting the appliance accidentally.
• Store idle pump out of the reach of children and do not allow
persons unfamiliar with the pump or these instructions
to operate the pump. Pumps are dangerous in the hands of
untrained users.
• Maintain pump and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the pump's operation. If damaged,
have the pump repaired before use. Accidents can be caused
by a poorly maintained pump.
• Only use accessories specifi cally recommended for this tool.
Others may be hazardous. Use the pump and accessories
etc. in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the pump for operations different from those
intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping surface do
not allow for safe handling and control of the tool in unexpected
situations.
• When the size of the service port on the unit is 5/16", use the
supplied different diameter adapter.
Manifold mode
• When using a manifold, turn ON Manifold mode for best
performance.
Low Battery mode
• When battery capacity reaches 5 minutes of runtime remaining,
the pump will enter low battery mode. The Low Battery LED will
light and a buzzer will sound. The pump will reduce in speed to
converse runtime and maintain vacuum. Replace battery.
Thermal Overload
• If Power button LED begins blinking, the tool has entered thermal
overload protection and cannot be restarted until the pump has
cooled down.
Selecting Hoses
• For best performance, use vacuum rated hoses directly
connected to the pump that are as short and of the widest
diameter possible. Inspect hoses before operation and replace if
worn. When using a manifold, a 4-port manifold is recommended.
SPECIFIED CONDITIONS OF USE
Vacuum pump for air evacuation of closed systems (air
conditioners, tanks, etc). This equipment is specially designed for
HVAC & R systems.
Do not use this product in any other way as stated for normal use.
BATTERIES
Recharge only with the charger specifi ed by the manufacturer. A
charger that is suitable for one type of battery pack may create a
risk of fi re when used with another battery pack.
Use pump only with specifi cally designated battery packs. Use of
any other battery packs may create a risk of injury and fi re.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
Do not expose a battery pack or pump to fi re or excessive
temperature. Exposure to fi re or temperature above 265°F (130°C)
may cause explosion.
The contacts of chargers and battery packs must be kept clean.
15
01.09.23 08:21 01.09.23 08:21