Atlas Copco PowerMACS TC-4000P Sicherheitshinweise Seite 5

PowerMACS TC-4000P
• For minimum electrical interference, locate the
equipment as far as possible from sources of
electrical noise, e.g. arc welding equipment etc.
• Do not abuse the power lead. Never use the
power lead to carry the equipment or to pull the
plug from a socket. Keep the power lead away
from heat, oil, sharp edges or moving parts.
Replace damaged leads immediately. Damaged
leads increase the risk of electric shock.
Useful information
Website
Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products,
accessories, spare parts and published matters on
our website.
Country of origin
Please refer to the information on the product la-
bel.
Warranty
• Product warranty will expire 12 months after
the product is first taken into use, but will in
any case expire at the latest 13 months after de-
livery.
• Normal wear and tear on parts is not included
within the warranty.
• Normal wear and tear is that which requires
a part change or other adjustment/overhaul
during standard tools maintenance typical
for that period (expressed in time, operation
hours or otherwise).
• The product warranty relies on the correct use,
maintenance, and repair of the tool and its com-
ponent parts.
• Damage to parts that occurs as a result of inad-
equate maintenance or performed by parties
other than Atlas Copco or their Certified Ser-
vice Partners during the warranty period is not
covered by the warranty.
• To avoid damage or destruction of tool parts,
service the tool according to the recommended
maintenance schedules and follow the correct
instructions.
© Atlas Copco Industrial Technique AB - 9836 4061 00
• Warranty repairs are only performed in Atlas
Copco workshops or by Certified Service Part-
ners.
Atlas Copco offers extended warranty and state of
the art preventive maintenance through its Tool-
Cover contracts. For further information contact
your local Service representative.
For electrical motors:
• Warranty will only apply when the electric mo-
tor has not been opened.
ServAid
ServAid is a portal that contains technical informa-
tion for all hardware and software products such
as:
- Safety Information including declarations, stan-
dards and directives
- Technical data
- Installation, Operation and Service Instructions
- Spare parts lists
- Accessories
ServAid is continuously updated and is available
at:
https://servaid.atlascopco.com
For further information contact your local Atlas
Copco representative.
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products
sold by Atlas Copco.
For more information, consult the website:
www.atlascopco.com
Choose Products - Safety Data Sheets, and fol-
low the instructions on the page.
Déclarations
Remarque
De nombreux évènements dans l'environnement
d'exploitation peuvent affecter le processus de ser-
rage et nécessiteront une validation des résultats.
Conformément aux normes et règlements applica-
bles, nous vous invitons par la présente à contrôler
le couple installé et le sens de rotation après tout
Safety Information
5