Care And Maintenance - Create COTTON CANDY MAKER Bedienungsanleitung

5. Turn the machine back on by pressing the ON button. The extractor head will start to
rotate.
6. The appliance will now start producing cotton candy. Insert a stick into the container in
a completely vertical position. Then slowly rotate the stick between your fingers while si-
multaneously moving it in a one-way circular direction slightly above the edge of the bowl.
7. Once you've gathered some yarn, continue with the same procedure as above, only this
time start tilting the stick in the container to make it easier for the yarn to collect in it.
8. When you are finished, turn the switch to the OFF position and unplug the machine.
Warning:
• The appliance is subject to overheating if used for more than 30 minutes at a time. After
this period, the appliance must be allowed to cool down for at least 10 minutes before
being used again.
• Overheating of the appliance may pose a risk of fire.
• Switch off the appliance and allow the extractor head to come to a complete stop before
refilling. This is important to avoid spilling sugar on the heating elements below the ex-
tractor head. Any residue left on the heating elements can present a fire hazard.
• All removable plastic parts are dishwasher safe.
• Clean the motor unit by wiping it with a soft, damp cloth.
• The pump head can be hand washed with warm soapy water.
• Always unplug the machine and allow it to cool completely before taking it apart for cleaning.
NOTE: Never immerse the motor unit in water.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.

CARE AND MAINTENANCE

E NGLI SH
9