Pioneer MVH-390BT Bedienungsanleitung Seite 11

To answer an incoming call
1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current Press the M.C. dial.
caller and a caller on hold
Cancel a caller on hold Press and hold
Adjust the volume of the Turn the M.C. dial during the call.
caller's voice (When private
mode is on, this function is not
available.)
Turn the private mode on or Press BAND/
off
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
to 6/ ), then press the M.C. dial.
.
when a call is received.
.
during the call.
to 6/ ).
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice
recognition is connected to the unit via Bluetooth.
1
Press and hold to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice
commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Phone menu
Menu Item Description
RECENTS Display the missed call history.
[MISSED]
[DIALLED] Display the dialed call history.
[RECEIVED] Display the received call history.
PHONE BOOK*1 Display the contacts which have been transferred from
your phone. Set [VISIBLE] in the Bluetooth settings to
[ON] to browse the contacts via this unit.
PRESET 1-6 Recall the preset phone numbers. You can also recall the
preset phone numbers by pressing one of the number
buttons (1/
A.ANSR*2 Select [ON] to answer an incoming call automatically.
[ON], [OFF]
R.TONE Select [ON] if the ring tone does not come out from the
car speakers. Depending on the connected phone, this
[ON], [OFF]
function may not work.
PB INVT Invert the order of names in the phone book (name
view).
.
to 6/ ).
11
En