YATO YT-82818 Originalanleitung Seite 12

CHARACTERISTICS OF TOOL
Multifunctional oscillating tool is an ordinary power tool, which does not require an external power source, it is mainly designed
for fi nishing works with processing of wood plastic, and metal, especially in the corners and places, which are diffi cult to access.
The tool allows for cutting, grinding, surface cleaning and polishing by using a suitable insertion tool. In any case, you should
not use the tools for the machining of materials other than those listed above, for example. for grinding plaster, fi llers with fi ber
reinforcement, etc. reliable, and safe operation of the device is dependent on its proper use, therefore:
Prior to working with the tool, you should read all the instruction and keep it around.
Attention! The dust generated during grinding of certain surfaces can be harmful for health, and even toxic.
This note applies to i.a. grinding the surfaces coated with paints containing lead, to some species of wood, some metals (e.g.
lead) and materials, therefore, during the work you should use an eff ective dust extraction, dust masks and other measures to
protect the skin and respiratory tract. For any damage caused by failure to comply with safety regulations and instructions of this
manual, the supplier is not responsible.
EQUIPMENT
The product is supplied in a complete state and requires no assembly. except for the installation of the insert tool, which is described
further in this manual. The product is supplied with the battery charger charging station (charger) and the inserted tool.
Attention! The product of the catalog number: YT-82819 has not been equipped with a rechargeable battery and charging station.
TECHNICAL PARAMETRES
Parameter
Catalogue number
Operating voltage
Number of oscillations
Noise level
- acoustic pressure
- LWA power
Protection grade
Insulation class
Level of vibration (drilling / screwdriveting)
Mass
Battery
Capacity of the battery*
Charger*
Input voltage
Mains frequency
Output voltage
Input current
Rated power
Time of charging**
* only for models equipped with battery and charger
** charging time applies only to the battery with a capacity listed in table
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
O R I G I N A L
12
EN
Unit of measurement
[V]
[min ]
-1
[dB]
[dB]
[m/s 2 ]
[kg]
[Ah]
[V]
[Hz]
[V]
[mA]
[W]
[h]
I N S T R U C T I O N S
Value
YT-82818, YT-82819
18 DC
8 000 - 18 000
77,0 ± 3,0
88,0 ± 3,0
IPX0
III
4,68 ± 1,5
0,9
Li-Ion
2
220 - 240
50 / 60
21 DC
2.4
60
1