Husqvarna BLASTRAC DC 200 Betriebsanleitung Seite 31

Controls, indicators and connections
A. Vacuum gauge
Main switch (on "I" - off "0")
B.
C. Reverse phase indicator (only for L - M - H versions)
D. Warning light indicating thermic intervention
E. Machine electrically powered indicator
F. Phase inverter
G. Electric filter shaker start button (optional)
H. Stop button I.
Start button
L. Hour counter
M. Visual level gauge
N. Castor brakes
O. Inlet
P. Container release
Q. Filter chamber
R. Dust container
S. Main filter shaker knob
Inspections prior to starting
Prior to starting, check that:
–
The filters are installed;
–
all latches are tightly locked;
– The hose and tools have been correctly fitted into inlet "F"
(Fig. 5);
–
The bag or safety container are installed, if applicable.
–
Do not use the vacuum cleaner if the filter is faulty.
Starting up
– Lock the castor brakes "E" (Fig. 6) before starting the
vacuum cleaner.
– Move switch "B" (Fig. 6) to the On position ("I").
–
If the vacuum cleaner has been working and then stops
and the indicator light "C" (Fig. 4) comes on, or if the
vacuum cleaner motor turns in the wrong direction, turn it
off and turn the inverter "F".
GB
C65
Figure 4
8
11/2015