Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wet and dry applications
Note
1.
The supplied filters and the safety container (if applicable)
must be installed correctly.
2.
If the machine is used to clean up liquids, make sure that
the liquid level sensor activates and operates in the correct
way.
ATTENTION DANGER!
Comply with the safety regulations governing the materials
for which the vacuum cleaner is used.
ATTENTION DANGER!
If the wet cleaner variant is used:
–
Make sure that the liquid level sensor operates
correctly before using the vacuum cleaner to clean up
liquids.
–
If foam forms, immediately stop work and empty the
container.
–
Warning: switch off the vacuum cleaner immediately if
foam or liquid leaks out.
–
Regularly clean the liquid level limiting device and
check to make sure that there are no signs of damage.
–
Warning: the dirty liquid collected by the vacuum must
be considered conductive.
GB
C65
Maintenance and repairs
ATTENTION DANGER!
Disconnect the vacuum cleaner from its power source
before cleaning, servicing, replacing parts or converting it
to obtain another version/variant.
The plug must be removed from the socket.
–
Only carry out the maintenance work described in this
manual.
–
Only use original spare parts.
–
Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could jeopardize
your safety. Moreover, such action would immediately void
the CE declaration of conformity issued with the machine.
ATTENTION DANGER!
Contact the technical assistance service or sales network
for maintenance operations not described in this manual.
6
11/2015
Werbung
