Times - Megasat HD Stick 510se Bedienungsanleitung

4. Installation and Operation

4.4 Times

Time Settings
In this MENU, you can change the TIME
MODE and setting time manually, or ad-
just GMT time.
The default time setup is auto, but you
can select manual and input manually,
select the time zone of your country
and you will get the correct current time
which is based on TDT (Time and Data Ta-
ble) in the stream of the current channel
service.
Event Timer
In this menu, you can set up the timer for
event you have selected, so the STB will
change the channel you already set up
when the event time is on due.
Sleep Timer
In this menu, you can set the sleep timer
15min, 30, 45, etc.. 120min, so that the
STB will power off automatically on time.
Standby Hour
In this menu, you can set the standby
hours of your STB, so that your STB will
power off automatically on time.
APD Standby (Automatically Power
Down)
Set this menu ON, the receiver will auto-
matically go into Standby Mode if recei-
ver has no any operation executed after 3
hours normal working with power.
ENGLISH
18