KIPP K1495 Bedienungsanleitung Seite 31

5.3.2 Disconnecting the radio link
The indexing plunger with status sensor does not have its own disconnecting
device.
The radio link is always disconnected at the receiver end. The procedure can be
found in the respective operating instructions.
INFO!
Disconnecting linked devices
If linked receivers are not disconnected, the secure link prevents the indexing
plunger being reconnected to another receiver.
If it is not possible to disconnect the receiver e.g. due to a defect, this can be
done by briefly removing the battery.
5.4 Operation
After successful commissioning, the linked indexing plungers with status sensor
send the actuation status and the battery charge level to the receiver at a
transmission rate of 10 1/s.
Apart from the mechanical operation, no other activities by the user are required.
INFO!
Secure radio communication
The communication between the indexing plunger and the Gateway receiver is
encrypted.
31