Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
When unloading the packages upon delivery and during internal
transport, proceed with care and observe the symbols on the
packaging.
•
For internal transport, follow the instructions in the section
"Packaging and Storage".
The indexing plungers with status sensor require careful handling. Hard impacts
to the device during transport can cause permanent damage.
4.2 Packaging and Storage
The packaging offers optimum protection for the device. Do not remove the
indexing plunger with status sensor from the packaging until immediately before
installation. It is also recommended to keep the packaging for e.g. location
changes or repair shipments.
The permissible ambient conditions can be found in the section Technical Data.
5 . C o m m i s s i o n i n g , O p e r a t i o n
5.1 Installation
Depending on the version, the indexing plunger with status sensor is fastened
with the sleeve by screwing or pressing in to one of the components being
indexed.
Further information can be found in the respective data sheets.
5.2 Energy management
The indexing plunger with status sensor has an intelligent energy management
system to increase battery life.
A distinction is made between two operating modes:
1. Idle mode
all device functions are inactive. Energy consumption is minimal.
29
Werbung
