Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating the Streamflo® Filtration Systems
When purchasing the product, make sure it has an
identification plate. If this is missing, notify the
distributor / manufacturer where you purchased the
unit from.
Use of an appliance without an identification plate
absolves the manufacturer from all liability. Products
without an identification plate should be considered
as anonymous and potentially dangerous.
Unpacking of the Streamflo® filtration system
Your Streamflo® Filtration System has been carefully manufactured, checked through QC and pack-
aged as a kit.
Carefully unpack your new Streamflo® Filtration System and carry out a thorough visual check on all
parts. If in doubt, do not use the system. Contact your dealer and/or manufacturer.
Packaging (bags, boxes, nails, tape etc.) should be kept out of reach of children as they may
represent a potential hazard. Packaging can be recycled according to your local legislation.
Storage of the Streamflo® filtration system
Short term and long term storage is an important issue. The Streamflo® filtration system must be
protected from algae and bacteria growth in the pressure vessels caused by stagnant water. The
de-ionising (DI) resin must not dry out wither.
Important
The unit must be protected from freezing.
You can transport or store the trolley system with the handles folded down. Loosed the
locking fixings, lift the handle and fold forwards.
W : www.streamline-eu.com E : contact@streamline-eu.com T : +33 (0) 4 89 51 86 30
Operating the Streamflo® Filtration Systems
4
STREAMFLO
®
9
Werbung
