Malfunctions And Troubleshooting - Streamline STREAMFLO SF-TR25L-000 Bedienungsanleitung

Malfunctions and Troubleshooting

To switch off the Streamflo® filtration system after completing the cleaning task, simply:
i. Low water pressure or water supply at waterfed brush
a. Check for any blockages or kinks in hose
b. Disconnect all extension hose reels and connect the Streamflo® filtration
system directly to the telescopic pole
c. Increase water flow rate on flow controller
d. Contact service centre
ii. High pure water TDS
a. Check DI resin quality – replace DI resin beads
b. Contact service centre
iii. Pump will not start
a. Check battery charge – see
b. Check fuse on battery charger
c. Check fuse on mains power
d. Contact service centre
iv. Controller stating 'DE' or 'PS' constantly
a. Check for any blockages in hose or telescopic pole tubing
b. Check for any blockages in membrane
c. Raise the calibration on the controller
d. Contact service centre
v. Controller flashing 'BAT' constantly
a. Plug in battery charger immediately before the battery is flat
b. Contact service centre
W : www.streamline-eu.com E : contact@streamline-eu.com T : +33 (0) 4 89 51 86 30
5 Malfunctions and Troubleshooting
'12.1 How to charge your battery'
STREAMFLO
®
17