Maintenance and Replacing Filters
6
Maintenance and Replacing Filters
Care and maintenance of your Streamflo® filtration system will ensure it is well looked after and
running smoothly every time.
It is recommended to run a weekly examination on the Streamflo® filtration system to ensure the
filters and connections are adequate and effective for producing pure 000ppm water quality.
Weekly inspection
•
Keep a check on the pure water TDS by using the
handheld TDS meter. This measures in parts per
million (ppm). If the output reads higher than 3ppm,
it is recommended to change the de-ionising (DI)
filter, and make a note in the back of the
inspection booklet
•
Keep a check on the battery voltage by running
through the controller function until you reach 'BAT'.
A good healthy battery will read between 11V and
12.4V.
18
W : www.streamline-eu.com E : contact@streamline-eu.com T : +33 (0) 4 89 51 86 30