Operating your Streamflo® Filtration System
The Streamflo® filtration system is designed for a single operator use.
The water supply can sometimes be interrupted for short lengths of time i.e. when the operator
moves from window to window, however if the Streamflo® filtration system is interrupted for long
periods of time, it is best to switch off the pump to save overheating and/or over pressurising, and
potentially damaging the system.
If the operator is using 4x jets with the waterfed brush, it is advised to turn up the speed of the
controller, to give sufficient water flow for quality cleaning and rinsing.
Important
If you have a 50ltr trolley system, it is important that the pump draws from both 25ltr water
tanks simultaneously.
Turning your Streamflo® Filtration System OFF
To switch off the Streamflo® filtration system after completing the cleaning task, simply:
i.
Press and hold the
the Streamline® flow controller,
switching off the 100psi pump
ii. Disconnect the telescopic pole and all
hose lengths connected to the system
16
W : www.streamline-eu.com E : contact@streamline-eu.com T : +33 (0) 4 89 51 86 30
button on