Candy CRE H8A3DE-S Bedienungsanleitung Seite 69

KEY LOCK
Pressing simultaneously the buttons "E"

and "F" for about 2 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making accidental or
unwanted changes if a button on the
display is pressed accidently during a cycle.
The key lock can be simply cancelled by

pressing the two buttons simultaneously
again.
In case of opening of porthole with

activated KEY LOCK, the cycle stops but
the lock is kept: to restart the cycle, you
must remove the
START/PAUSE again.
KEY LOCK can be modified at any time

of the cycle.
Display
The display shows the remaining time for
drying, the postponed time in case of
delayed start selection
notifications setting.
1) DRYING SELECTION INDICATOR
LIGHTS
The indicator lights display the degrees
of dryness that can be selected by the
relevant button.
2) WATER CONTAINER INDICATOR LIGHT
It lights up when it's necessary to empty the
condensate water tank.
lock and press
and other
69
3) LINT FILTERS AND HEAT EXCHANGER
CLEANING INDICATOR LIGHT
The indicator light illuminates in fixed mode
to signal the need of cleaning the lint filters
and in blinking mode to signal the need of
cleaning the heat exchanger.
4) ANTI CREASE INDICATOR LIGHT
The indicator light shows the selection of
the relevant option.
5) RAPIDS INDICATOR LIGHTS
The indicator lights show the selected time
of the rapid cycles.
6) COOLING INDICATOR LIGHT
It lights up when the cycle is in the cooling
phase.