Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Removing metal grease filter
Open the lock and fold down the metal grease filter. While
1.
doing this, place your other hand under the metal grease
filter.
Take the metal grease filter out of the holder.
2.
Notes
Fat may accumulate in the bottom of the metal grease filter.
■
Hold the metal grease filter level to prevent grease from
■
dripping out.
Clean the metal grease filter.
3.
On appliances with a glass plate in the filter pull-out:
The glass plate can be removed easily and can be cleaned in
■
the dishwasher.
To remove it, carefully lift the glass plate.
■
Installing the metal mesh grease filter
Insert the metal mesh grease filter.
1.
While doing this, place the other hand under the metal mesh
grease filter.
Fold the metal mesh grease filter upwards, locking it in place.
2.
20
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Malfunction table
Problem
Possible cause Solution
The appliance
The plug is not
does not work
plugged in.
Power cut
Faulty fuse
The lighting
The bulbs are
does not work.
faulty.
--------
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is OK
For information on chang-
ing the bulbs, see the
"Replacing Bulbs" section.
Werbung
