Holiday Program - Danfoss ECL Comfort 210 Bedienungsanleitung

6.0 Holiday program

There is a holiday program for each circuit and a
common holiday program for all circuits.
Each holiday program contains one or more
schedules. It can be set to a start date and an end
date. The set period starts on the start date at
00.00 and stops on end date at 24.00.
The end date must be at least one day later than
the start date.
How to set your holiday schedule:
Action: Purpose:
Choose 'MENU'
Con rm
Choose the circuit selector at
the top right corner in the
display
Con rm
Choose a circuit or 'Common
controller settings'
Con rm
Go to 'Holiday'
Con rm
Choose a schedule
Con rm
Con rm choice of mode selector
Choose mode:
• Comfort
• Comfort 7-23
• Saving
• Frost protection
Con rm
Enter start time rst and then
the end time
Con rm
Go to 'MENU'
Con rm
Choose 'Yes' or 'No' in 'Save' .
Choose the next schedule, if
required
BC186686479610en-010601
The holiday program in the 'Common
controller settings' is valid for all circuits.
The holiday program can also be set
individually in the heating or DHW circuits.
Examples:
7-23
© Danfoss | 2024.03 | 9