WIKA LH-10 Betriebsanleitung Seite 11

6. Commissioning, operation
6. Commissioning, operation
WARNING!
Observe the working conditions in accordance with chapter 3 "Specifications".
CAUTION!
Prior to commissioning, the submersible pressure transmitter must be subjected to a visual inspection.
Leaking fluid is indicative of damage.
■
Only use the submersible pressure transmitter if it is in perfect condition with respect to safety.
■
6.1 Mechanical mounting
The protection cap protects the internal diaphragm from damage. Remove the protective cap if the medium is viscous
or contaminated.
Protection cap
Requirements for mounting point
The existence of strong electromagnetic fields in a frequency range of < 100 MHz may result in increased measuring
errors up to 0.5 %. Do not install the instruments in the vicinity of strong electromagnetic sources of interference (e.g.
transmitting devices, radio equipment), or use sheath current filters where applicable.
WIKA operating instructions submersible pressure transmitter, model LH-10
Internal diaphragm
EN
11