Installation; Standard Installation - STIEBEL ELTRON DEL 27 SL electronic LCD Bedienung Und Installation

INSTALLATION

Installation
10. Installation

10.1 Standard installation

- Electrical connection in the lower section of the appliance for
installation on unfinished walls
- Water connection for installation on unfinished walls
- For the appliance with adjustable connected load, the middle
load is preset.
For further installation options, see chapter "Installation options".
f Open the appliance. f
f Remove the back panel by pressing the two locking hooks f
and pulling the lower part of the back panel forwards.
f Use the installation template to mark out the holes for drill- f
ing. If the appliance is to be installed with water connections
for finished walls, also mark out the fixing hole in the lower
part of the template.
f Drill the holes and secure the wall mounting bracket with f
2 screws and 2 rawl plugs (screws and rawl plugs are not
part of the standard delivery).
Note
If you are installing the appliance with flexible water
connections, also secure the back panel with a screw.
f Fit the wall mounting bracket. f
www.stiebel-eltron.com
160
30
1 Installation aid
f Prepare the power cable. f
Making the water connection
Material losses
!
Carry out all water connection and installation work in
accordance with regulations.
f Seal and insert the twin connectors. f
3
3
2
1
1 Cold water with 3-way ball shut-off valve
2 DHW with tee
3 Gasket
f Fit the water connections. f
f Fit the strainer provided in the 3-way ball shut-off valve f
Damage to the appliance and environment
!
The strainer must be fitted for the appliance to function.
f When replacing the appliance, check that the strain- f
er is present.
1
DEL SL electronic LCD | 29