Kärcher B 300 RI BP Bedienungsanleitung Seite 72

9.8.9 Cleaning the hydraulic oil cooler
9.9 Replacement tasks
9.9.1 Fuses
72
The oil cooler is located on the left side of the device, at the
very front under the hood.
CAUTION
Risk of burns!
Allow the vehicle to cool down sufficiently before per-

forming any maintenance and repair work.
Do not touch hot parts of the hydraulics.

1 Hydraulic oil cooler
2 Cooling fins
A dirty radiator will easily cause overheating, therefore
each day:
Check the radiator and cooling fins for dirt.

Remove dirt with a soft brush, compressed air (max. 5

bar) or water (at low pressure).
The device fuses (plug-in fuses-ATO) are located on the
right under the steering wheel.
1 Fuse cover
2 Safety lid seal
3 Fuse holder
4 Fuses
Test the fuses, if necessary replace with new fuses of

the same capacity.
Note: Only use fuses with identical safety ratings.
Never use other values or fuse bridges!
34
-
EN