Multi Function Display - Onkyo R-100 Bedienungsanleitung

MULTI FUNCTION DISPLAY
About Display
"CD are used for-display in this unit. Please notice that LCD
@) Display
This displays the input source, name of band being used, the
frequency, tone' control conditions, the preset station, time,
or other information.
@) Timer Stand-by Indicator
This lights up when. the timer reservation setting has been
completed.
() Sleep Indicator
This lights up when the sleep timer has been set through the
remote contro] transmitter.
Operations
VOLUME
Direct function feature
NOTE:
This function works when an Onkyo cassette tape deck K-100
or CD player C-100 is connected to a R-100 with an
Ri
remote control cable.
Tuner Reception
VOLUME
NOTE:
@ Stereo Indicator
This lights when. an. FM. stereo broadcast is received and-does
not light when a mono broadcast is received. It will not light
up when an FM stereo broadcast is received if the signal is
weak, since reception will automatically-switch.to the monaural
mode. This indicator lights only during FM stereo reception.
@ FM Mode Indicator
This indicator lights up when an FM broadcast is received by
using FM Mode Button [10].
@ Source Direct indicator
This will flash when the Direct button on the remote control
transmitter is used to carry out operations.
@ Audio Muting Indicator
This indicator lights when the muting function is in operation.
Pressing the Audio Muting button of the remote control
transmitter enables the muting function.
® Memory Indicator
This lights up when presetting AM or FM stations into the
memory.
@ Start play of the selected input source.
Adjust the Volume Control knob to the appropriate level.
NOTE:
When a disc has been loaded in the C-100 CD player, the input
source will automatically be set at the CD position when the
power is turned ON.
Example 1 '
Example 2 (Remote control transmitter only)
With a tape deck as the current listening source, if the remote
memory.