Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To Play Tape
> Did you read the "General Operation" on page 4?
Tape Program Indicator
The tape program indicator (tApE ~* or
rape ") appears on the display panel
during tape playback.
TAGE ™ : Indicates the top side of the
3 cassette is being played.
TOPE
'Indicates the bottom side of
the cassette is being played.
Dolby Noise Reduction
Button
Press the button on (light comes on) for play-
back
of tape recorded
by the Dolby Noise
Metal Button (MTL)
Reduction System.
Press to on for "Metal" tape. The metal "MTL"
Press the button again (light goes off) for play-
indicator shows on the LCD display. Press to
back of tape not recorded by the Dolby Noise
off for "normal" tape. The metal "MTL" indica-
Reduction
System.
Cassette
tapes
not
tor goes off.
recorded with Dolby NR do not benefit from use
NOTE: This switch serves as an equalizer for
of Dolby NR during playback.
reproduction of tape recorded using "Metal".
| Using the Dolby NR System on non-Dolby-
tape
with
7Ous
equalization,
or tape
encoded
tape
causes
high
frequency
recorded using "normal" tape with 120us
imbalance.
equalization. Wrong setting will cause high
NOTE: The Dolby NR circuit will not operate
frequency imbalance.
during radio reception.
2 Cassette Slot
Insert
cassette
with exposed
tape
side
facing to the right. Push
inward until the
mechanism captures the cassette. Playback
starts automatically when the cassette tape
is inserted.
1 Turn on power switch.
3 Tape Program Selector (PRG)
Depress both buttons (~~
»p-) fully
to select the desired program of tape
play.
Otherwise,
tape
program _ indicator
changes
automatically
when
the tape
reaches its end (Auto-Reverse System).
Exposed
tape side
"TP" frequency or station name appears.
"N LN—mO2m
fe Seana
Weihua
SRC
GRANT
Sage BENI
ETT AN
Ra
9
RE
MAA
La
rel
pet
hh
Bee
Ae Bai der
pitt
|
|
:
Werbung
