Icy Box IB-2914MSCL-C31 Handbuch Seite 13

Manual IB-2914MSCL-C31
5. Once the 25% LED and the LEDs (2) of the source SSD and target SSD start
flashing, the cloning process has started.
25%
0%
ATTENTION: DO NOT stop or turn off the device until the clone process is
finished completely!
• If all status LEDs (3) for the cloning process flash at the same time, an error
occurred as the target drive is smaller or one of the drives is damaged.
Please turn off the device and change to a suitable or functional drive.
• When the cloning process is successfully completed, all LEDs (3) light up
continuously.
• Switch off the clone station with the ON/OFF switch (5).
HINT: To uninstall the drives please make sure that the device is turned off.
50% 75%
100%
100%