Bosch UniversalUSB 18V-45 Bedienungsanleitung Seite 29

– Insert the battery (4) into the battery adapter (1).
– Connect the charging cable of your USB device to the USB port (3) on
the battery adapter (1).
When the battery of your USB device is fully charged, the USB adapter
will terminate the charging process. When charging is required again, the
USB adapter will continue charging.
In order to protect the battery of your USB device, we recommend that
you disconnect the USB device from the USB adapter when the charging
process is complete.
Automatic shutdown
To save energy, the USB adapter will shut down automatically under the
following conditions:
– After the battery has been inserted, no USB device is connected for
longer than 2 weeks.
– The connected USB device will not draw charge for longer than
8 hours.
– Once charging is complete and the USB cable has been detached, no
USB device is connected for longer than 2 weeks.
Switch the adapter back on by removing and re-inserting the battery.
Bosch Power Tools
English | 29
1 609 92A 97A | (15.01.2024)