Atlas Copco ETV STB33-15-B10-BCR-IRC-Z Produktanweisungen Seite 8

Verfügbare Sprachen

Safety and operating instructions

Model

ETV STB32/33/34

ETV STB62/63/64

ETP STB32/33/34

Handling

Operating

As tightening torque increase the reaction force build up equally. Make sure

that the tool is in correct working order and that the controller is correctly pro-

grammed to avoid unexpected behaviour from the tool, which may result in op-

erator injury.

ETV/ETD: Check that the tool is in the correct running direction by turn-

ing the reverse ring,

• Clockwise = Tool forward.

• Anti clockwise = Tool reverse

ETP: Check that the tool is in the correct running direction by pushing the re-

vers switch.

The soft-start function facilitates entering the screw head and thread.

The duration of the soft start is adjustable, see the manual for the POWER FO-

CUS/ drive unit.

The tool is equipped with four LED´s for specific tasks:

• Connection LED: Indicates connection to Power Focus

• Battery LED: Indicates battery status (flashing light for low and fixed light

for empty battery)

• Batch LED: Indicated Batch done

• Alarm LED: A failure/event is detected

Preventing ESD problems

The components inside the tool and controller are sensitive to electrostatic dis-

charge. To avoid future malfunction, make sure that service and maintenance is

carried out in an ESD approved work environment. The figure below shows an

example of an appropriate service work station.

Battery

Li-ion 18V / 2.6Ah

Li-ion 30V / 2.6Ah

Li-ion 18V / 2.6Ah

ETV STB33-15-B10-BCR-IRC-Z