Atlas Copco ETV STB33-15-B10-BCR-IRC-Z Produktanweisungen Seite 7

ETV STB33-15-B10-BCR-IRC-Z
Parameter
Discrete 2 of 5
Length(s) for D 2 of 5
Chinese 2 of 5
Codabar
Lengths for Codabar
CLSI Editing
NOTIS Editing
MSI
Length(s) for MSI
MSI Check Digits
Transmit MSI Check Digit
MSI Check Digit Algorithm
RSS-14
RSS-Limited
RSS-Expanded
Convert RSS to UPC/EAN
Boot Up Event
Parameter Event
Linear Code Type Security Level
Linear Security Level 1
The following code types must be successfully read twice before being de-
coded:
Code Type
Codabar
MSI
D 2 of 5
I 2 of 5
UPC/EAN Security Level
UPC/EAN Security Level 0
This default setting allows the scan engine to operate in its most aggressive
state, while providing sufficient security in decoding most "in-spec" UPC/EAN
bar codes.
Installation
Installation
For installation guidelines refer to POWER FOCUS manual (9836 3123 01).
The tool calibration torque is stored in non-volatile memory in the tool.
Any changes made to the tool calibration torque in the POWER FOCUS
will update the stored value in the tool.
EN
Factory Default
Disable
12
Disable
Disable
5-55
Disable
Disable
Disable
6-55
One
Disable
Mod 10/Mod 10
Disable
Disable
Disable
Disable
Disable
Disable
Length
All
4 or less
8 or less
8 or less
© Atlas Copco Industrial Technique AB - 9836 888800 00
Safety and operating instructions
7