Notes On Safety - Rehau RAUTOOl K10 Bedienungsanleitung

nOTes On sAFeTY

Attention!
Please read all safety notes before operating tool.
Observe the notes during use and always keep them with the tool.
In addition to the operating instructions, generally applicable legal and
other binding regulations relating to industrial safety and the preven-
tion of accidents should be observed and the relevant instructions
given.
1. The tool is only suitable for preparation of REHAU compression
sleeve joints of the dimension stated on the tool (e.g. 10.1 x 1.1,
12 x 2.0 or 14 x 1.5). Do not use the tool for other purposes or
dimensions.
2. Only operate the tool with original REHAU parts and accessories.
3. Only allow repairs and maintenance to be carried out by authorised
persons. REHAU will reject any responsibility or liability for work
undertaken by unauthorised personnel
4. Only operate the tool using both hands.
5. Keep your workplace tidy and free of obstructions.
Make sure there is always sufficient light.
6. Keep unauthorised persons away from your workplace.
7. Wear suitable work clothes. Use goggles.
6
Attention!
REHAU does not accept any liability for damage or injuries that are due
to unsafe use of the product, inadequate maintenance or incorrect
product and system application. For planning and assembly, please
use our valid Technical Information. You can obtain the current version
of the document from your dealer or your REHAU Sales Office, or you
can download it at www.rehau.com.