Important Installation Notes - NEFF E1452N0 Montageanleitung

Assembly Instructions
For the installer and
kitchen expert!
Important installation
notes
The connection diagram is located on
the rear panel of the appliance.
~
220-230V
~
380-400V2N
~
380-400V3N
6
1 2 3 4 5
L1 N
1 2 3 4 5
L1
L3 N
1 2 3 4 5
L1 L2 L3 N
Properly dispose of packaging
materials.
Do not use oven door handle for
transporting or handling the unit during
installation.
WARNING: Connection and first start
of the appliance may only be performed
by an authorised specialist.
Connection must be made using an
H 0 5 V V- F mains connection cable.
Rated consumption, rated voltage
and type no. of the appliance:
See appliance nameplate behind the
oven door to the left beneath the side
edge of the oven.
The unit's nameplate is located at on
the sidewall of the unit.
Electrical safety of the appliance can
be ensured only if the equipment earth
in the building installation has been
installed according to regulations.
A separator must be installed in the
household circuit. A suitable separator
is a switch that has a contact gap of
more than 3 mm and interrupts all
poles. Other examples are LS switches,
fuses and contactors.
In the case of repairs interrupt all
power connections to the unit.
The properly installed appliance must
be covered on all sides in such a
fashion that not even components with
rough insulation are exposed to the
touch. The cover must be removable
with tools only.