Privileg PV900 IN Kurzanleitung Seite 12

At the end of cooking, the symbol
alarm sounds and AUTO flashes on the display.
A
U
T
O
Press any button to deactivate the alarm.
Return the function knob and thermostat knob to to
and , then press the time button for at least 2
seconds to switch off the oven.
SETTING THE TIMER
This option does not interrupt or activate cooking but
allows you to use the display as a timer, both while a
function is active and when the oven is off.
To activate the timer, long press the time button: the
symbol flashes on the display.
A
U
T
O
Use the and buttons to set the desired duration:
the countdown begins after a few seconds.
A
U
T
O
The display shows the time of the day and the
remains lit, confirmating the timer has been set.
Please note: To view the countdown and change it if
necessary, press the time button 2 seconds again.
4
• COOKTOP OPERATION
switches off, an
(see the instructions supplied with the cooktop).
Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
The oven control panel features 4 adjustable knobs
for cooktop operation. The cooktop control knobs
are marked with a numerical scale corresponding
to different power settings, and a series of function
symbols.
from the fridge, to keep baby bottles or food warm,
also for making yoghurt, melting chocolate, etc.
This function is only available when the residual
heat indicator is on. For this function, make sure
the residual heat indicator of the desired hotplate is
on. Turn the knob to
change the position of the knob.
until the end of cooking. To select this function, turn
the knob to
boil rapidly and remains on for a preset time. At the
end of the preset time, the cooktop automatically
returns to the maximum power setting. This
function can be selected even during cooking.
Important: before selecting this function, make sure
the pot is positioned on the selected hotplate in
order to avoid any damage to the cooktop surface.
The stated performance values for this function are
those guaranteed for all glass ceramic cooktops. For
this function, place the pot on the selected hotplate
and turn the knob to
position of the knob.
left hotplates. This extends the heating area of the
cooktop in order to allow the use of large, oval or
rectangular pots or cooking receptacles. To select
this function: turn the knob to
the residual heat indicator for the hotplate begins
to flash. To switch on the triple zone function (if
available), wait until the LED begins flashing quickly.
Select the power setting required by turning the
knob anticlockwise. The residual heat indicator
remains on to indicate that the cooktop is in use.
To deselect, turn the knob to by turning the knob
anticlockwise.
Please note: The multizone function can only be switched
on for the double and triple hotplates of the cooktop
GENTLE HEAT
To allow dough to rise, to soften butter taken
. To deselect the function,
HEAT MAINTENANCE
To maintain a constant temperature of 60°
.
FAST BOIL
This function is used to bring water to the
. To deselect, change the
MULTIZONE
This is available on the front left and rear
and wait until