MO-EL MO-BUTTERFLY 700 Gebrauch Und Wartung Seite 11

INSTALLATION
• Both the appliances 700 and 701 can be wall mounted (Fig. 1-2-7).
• The art.700 can be hanged on the ceiling (Fig. 5).
• The art.701 can be installed on a flat surface (Fig. 9).
An electrical outlet must be present nearby.
Position the appliance preferably at a height of about 6,5 feet, placing
it in the darkest area of the room, far from windows. This because the
appliance must eliminate insects from indoor and must avoid to attract
other of them from outdoor inside the room.
When wall mounted, it must be fixed with two screws placed on the wall.
The art.700 can be installed to the wall in two positions: with the lamps
and the glued papers towards the wall or towards the room (Fig. 1 and
2). In the first case, you will not see the stuck insects on the glued
paper, but the lamps will have less range of action; in the second case
the lamps will have the maximum range of action, but you will see the
stuck insects on the glued paper. We suggest to install the appliance
with the lamps towards the wall in public spaces or when esthetic
consideration are important. Otherwise we recommend to install the
appliance at the ceiling or at the wall with the lamps towards outside,
to have the maximum range of action.
INSTALLATION AT THE WALL (ART.700-701)
The wall should be free from obstructions to allow easy removal of the
glued paper and the cleaning of the appliance.
Make sure that the wall where you plan to mount the appliance is solid,
and free of electrical cables or water pipes inside.
• Art.700: decide if mount the appliance like in Fig. 1 or 2, as per the
considerations above.
• Art.701: mount the appliance like in Fig. 7.
Using a drill bit of the same diameter of the wall inserts, you must drill
two holes into the wall and insert the wall inserts into the holes.
Once the screws are securely mounted into the wall, hang the appli-
ance by introducing the hooks of the wall inserts into the apposite eye-
lets as shown on Fig. 1 and 2.
For keep the glued paper in its place, it is recommend to bend the two
tongues with a nipper in the bottom part of the appliance, as shown in
Fig.3 and 4.
11