Herunterladen Diese Seite drucken

Hitachi WJ-C1 Serie Erste Schritte Seite 27

Vorschau ausblenden Andere Handbücher für WJ-C1 Serie:

Werbung

4. Compliance to UL-standards
Das folgende Kapitel ist aufgrund von UL-Anforderungen in englischer Sprache ausgeführt.
UL Cautions
This section summarizes the items required for UL standard compliant inverter installation.
GENERAL:
WJ series C1 inverter is open type AC Inverter with three/single phase input and three phase output. It is intended
to be used in an enclosure. It is used to provide both an adjustable voltage and adjustable frequency to the AC
motor. The inverter automatically maintains the required volts-Hz ratio allowing the capability through the motor
speed range. It is multi-rated device, and the ratings are selectable according to load types by operator with
keypad operation.
Markings:
Maximum Surrounding Temperature:
ND (Normal Duty) : 50 deg C
LD (Light Duty) : 40 deg C
Storage Environment rating:
-20 to 65 deg C (for transportation)
Instruction for installation:
Pollution degree 2 environment and Overvoltage category 3
Electrical Connections:
See section "5.2 Main Circuit Terminal" (UserGuide_ExtendedMode_EN_NT363X)
Interconnection and wiring diagrams:
See section "5.4 Control Circuit Terminal" (UserGuide_ExtendedMode_EN_NT363X)
Short circuit rating and overcurrent protection device rating:
C1-S series, C1-001S to C1-022S models.
- [Non-semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 240 V
maximum.
- [Semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical amperes, 240
V maximum.
C1-L series, C1-001L to C1-037L models.
- [Non-semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 240 V
maximum.
C1-L series, C1-055L and C1-075L models.
- [Non-semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 240 V
maximum.
C1-L series, C1-110L and C1-150L models.
- [Non-semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 240 V
maximum.
C1-L series, C1-001L to C1-150L models.
- [Semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical amperes,
240V maximum.
C1-H series, C1-004H to C1-075H models.
- [Non-semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 480 V
maximum.
C1-H series, C1-110H and C1-150H models.
- [Non-semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 480 V
maximum.
C1-H series, C1-004H and C1-150H models.
- [Semiconductor Fuses]
Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical amperes,
480 V maximum.
HITACHI W J - C 1
27

Werbung

loading