Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Anleitung DRS 200
GB
Dear Customer,
Before you use the ratchet screwdriver for the first
time, please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.
1. Items supplied
1 ratchet screwdriver 1/2"
1 plug-in nipple 1/4"
2. Technical data
Release torque max.
Working range (max. thread size)
Permissible working pressure max.
Noise emission to DIN 45 635, Part 20
Sound power level L WA/max. C
Workplace-related emission
value L
PA/max.
Maximum measuring-surface
impulse sound pressure level
L
PA/Max. 1 m
Vibration (under load)
to DIN EN 28662 Part 1
and E DIN ISO 8662 Part 7
Square drive
Air consumption
Square drive
Recommended hose diameter internal
Air quality
Air supply
via conditioning unit with filter
pressure reducer and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW
Work settings
6 bar working pressure set at the
pressure reducer or filter pressure reducer
Please note:
When working with the ratchet screwdriver, be sure
to wear the necessary protective clothing. Observe
the safety regulations.
4
08.11.2001 8:49 Uhr
61 Nm
M10
6 bar
103 dB(A)
93 dB(A)
90 dB(A)
3,1 m/s
1/2 inch
approx. 113 l/min.
1/2"
Ø 9 mm
cleaned and oiled
Seite 4
3. Illustration
16
Item.
Description
1
plug-in nipple for the air supply
4
trigger lever
16
ratchet head
4. Proper use
The ratchet screwdriver is a handy pneumatic tool for
use in DIY and automotive workshops. It is ideal for
fastening and releasing threaded connections on
2
motor vehicles (wheels etc.) and on farming
equipment.
Note the required torques when tightening screws
and nuts. If necessary, use a torque wrench.
The drive sockets, bits and extension bars with lock
pin and rubber retaining ring are in accordance with
DIN. The drive sockets and bits can be changed
quickly and easily. The air supply is connected by
means of a plug-in nipple and a quick-release
coupling.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
1
4
Werbung
