Kenwood KA-50 Bedienungsanleitung Seite 9

STEREO INTEGRATED AMPLIFIER
P S E Se
ee
AA-
INSTRUCTION MANUAL
FOR YOUR RECORDS
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information
or service on this product.
Model . Serial number
AFTER UNPACKING
After unpacking, we recommend that you inspect the unit
for any possible shipping damage. If your unit is damaged or
fails to operate, notify your dealer immediately. If your unit
was shipped to you directly, notify the shipping company
without delay. Only the consignee (the person or company
receiving the unit) can file a claim against the carrier for shipp-
ing damage.
We recommend that you retain the original carton and
packing materials to prevent any damage should you
transport or ship your unit in the future.
INSTALLATION PRECAUTIONS
a) Avoid locations subject to direct sunlight.
b) Avoid high or low temperature extremes.
c) Keep the unit away from heat radiating sources.
d) Choose a location that is relatively free of vibration or ex-
cessive dust.
e) Make sure power is off before making any system connec-
tions.
SAFETY PRECAUTIONS
CLEANING
Do not use volatile solvents such as alcohol, paint thinner,
gasoline, benzine, etc. to clean the cabinet. Use a silicone
cloth or a clean dry cloth.
SERVICE OR MODIFICATIONS
Do not remove the cabinet or touch internal parts. Refer
all service to qualified service personnel. Unauthorized
modifications can result in a dangerous shock hazard and can
void the warranty. - =
VENTILATION HOLES
The case top is slotted to allow ventilation. Never block
these holes with ornamental cloths, books or other objects.
Make sure that metal objects such as coins hairpins, or
needles do not enter the unit through the ventilation holes.
The result could be a serious malfunction or a possible shock
hazard. Make sure that children do not insert foreign objects
into the ventilation holes.
IMPORTANT!
U.S.A. AND CANADA
Units shipped to the U.S.A. and Canada are design-
ed for operation on 120 volts AC only. These units are
not equipped with an AC Voltage Selector switch and
the discussion of such a switch that follows should be
disregarded.
ALL OTHER COUNTRIES
Units shipped to countries other than the U.S.A. and
Canada are equipped with an AC Voltage Selector
switch on the rear panel.
Refer to the following paragraph for the proper setting
of this switch.
AC VOLTAGE SELECTION
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC Voltage Selector Switch.
i
AC220~ 240 Vw AC220~ 240 V~:
AC110~120 V~ AC110~120 V~
This shows switch This shows switch
lever locked in the lever locked in the
AC220~ 240 Vw AC110~120 Vw.
position. ) position.
Move switch lever to match your line
voltage with a small screw driver or other
pointed tool.
AC Voltage Selector Switch
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
PRINTED IN JAPAN B50-3325-00 (K) (T)
5/151 67890N/152 D12345/252 67890N/253 0%.
Q@KENWOOD
Sha at el A i RES I U H E somati
SBA NES SESS S EGET ED BE REEDE UPLB BE EB ARE ERE CEASE AER APG. ELD. ELE SELER DEAE SEA RE REESE NEE BEL EE EEA LATE IAL