Pioneer BDR-XD08TB Gebrauchsanweisung Seite 14

Operations
The unit writes to discs when the supplied software application is installed on your PC. Writing fails if
the PC or operating system does not support the software.
Begin writing to disc
1 Connect the supplied USB cable.
2 Turn on the PC.
3 Press the [OPEN] button, and gently lift the disc cover by hand.
When this device is connected to a Mac with a disc inserted, this function cannot be used due to
macOS specifications. Please check the macOS User Guide for how to operate with a Mac.
4 Place the disc in the tray with the label facing up.
5 Close the disc cover gently.
6 Start the disc burning application.
End the writing session
rlands
1 Quit the disc burning application.
2 Press the [OPEN] button, and gently lift the disc cover by hand.
When this device is connected to a Mac with a disc inserted, this function cannot be used due to
macOS specifications. Please check the macOS User Guide for how to operate with a Mac.
3 Remove the disc.
4 Close the disc cover gently.
5 Shut down the PC.
When the lock mechanism is released, the disc cover needs to be fully opened in order to close
again.
14
BDR-XD08TB / BDR-XD08TS / BDR-XD08TG