Hohem iSteady MT2 Benutzerhandbuch Seite 8

Attach the camera with the quick release plate onto the L-bracket. Align the short arm of
L-bracket against the handle side of the camera.
Next comes mounting onto the stabilizer.
Unlock the mount latch and install the camera with L-bracket on the mount. Lock the
mount latch to ensure that the camera is tightly installed on the stabilizer.
How to quickly detach the camera from stabilizer:
Unlock the mount latch and remove the camera and quick release plate as a whole while
holding down the mount safety lock.
After that, loosen the L-bracket with the thumb screw
wrench (magnetically attached to the L-bracket). Adjust the L-
bracket according to the width of the camera and tighten the
screw after fitting properly.
1. Unlock the
mount latch.
8
2. Holding down the
mount safety lock.