Mounting & Balancing
Attaching the Tripod
Attach the tripod to the bottom of the iSteady MT2 handle. Unfold the tripod and place
the iSteady MT2 on a flat surface.
Mounting the Camera
Before mounting a camera, please unlock the roll and tilt motor lock switched to unlock
the axes. Unfold the support mount base and roll axis arm. Then lock roll motor and tilt
motor for installation of a camera.
Next, mount the quick release plate. Mount the camera onto the camera quick release
plate and tighten the screw.
If you are using a long-focus lens and the camera is front-heavy, you can mount the
screw with the camera at the end of the slot (as shown on the right), which makes sure
more space to adjust the centre of gravity for horizontal balancing. It is required to
righten the screw in case of stabilizer shaking when the stabilizer is powered on.
7