Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety instructions
• Observe the information of this document. Non-observance of the notes, oper-
ation which is not in accordance with use as prescribed below, wrong installa-
tion or handling can result in serious harm concerning the safety of persons
and plant. The device may only be installed, connected and commissioned by
qualified personnel.
• Disconnect the device externally before doing any work on it.
• In the case of malfunctions or uncertainties please contact the manufacturer.
Tampering with the device can lead to considerable risks for the safety of per-
sons and plant. It is not permitted and leads to an exclusion of any liability and
warranty claims.
More information on programming and operating
2. Function and features
The tdm R 360 is a programmable monitoring and operator module for plc con-
trolled systems. It was specially designed for mobile applications.
• The module communicates with the controller ecomat R 360 via the CAN bus,
• informs the operator of process states, process and measured data of all areas of
the vehicle/plant section,
• indicates messages of the vehicle/plant section,
• and enables the operator to influence the controller of the vehicle/plant section
(input of preset values, triggering of actions).
• The tdm R 360 works on the basis of a freely programmable software which is cre-
ated by PC and loaded into the module.
Multi-level operator and visualisation menus which enable a complex and flexible
visualisation and process actions can be created.
In addition, simple communication and visualisation processes can be programmed
and executed by the tdm R 360.
10
the dialogue module is given in the
manual ecomat tdm R 360
Werbung
