Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Controls and visual indication
3
Display
1
with graphic capabilities, backlit, adjustable brightness and contrast
Numerical keypad for the input of values
with integrated cursor keys, the basic functions are allocated as follows:
2
= exit menu (Escape);
/
= cursor keys up /down,
selection of parameters, alteration of parameter values
Function keys (can be freely allocated)
3
LEDs (can be freely allocated)
4. Preparations for the operation
First steps
When delivered the tdm R 360 contains a program for diagnostic, communication
and display setting.
• With power on (see section "Electrical connection") the module responds with an
initialisation graphics and carries out a short self-test.
• With the menu "CAN-Setup" you can then configure the CANinterface (default
identifier: transmission channel = 220, reception channel = 221). But these settings
can be made more conveniently via the software.
• Setting the brightness and contrast of the display:
Press the
-key and hold it down while setting the brightness with the keys
and the contrast with the keys
F1
F2
F3
F4
F5
F6
F7
F8
= open menu / confirm inputs (Enter)
/
= cursor keys left/right: selection of menus or menu points,
/ .
7
8
9
.
4
5
6
0
1
2
3
1
2
/
11
Werbung
