PAYTEC N86 Anleitung Seite 5

Paper Removal: Please tear off the paper in
the direction as shown in the picture. Do it
quick and with consistent power.
Install printer paper roll
1. Open the printer cover
2. Insert the paper roll into the pa-
per holder. Leave a small paper
piece below the paper cutter
3. Close the printer cover
Power charge:
battery. Please note: for charging the device, the lithium battery
must be inserted and the cover must be closed.
1. Plug the USB-C end of the cable into the USB-C port on the
right side of the device
2. Plug the other end into a power adaptor
3. Plug the power adaptor into a power outlet (you can also use
a PC or power bank as power supply)
4. Power on the terminal
5. The terminal screen will display the charging progress
6. After the terminal is fully charged " " will display
powe r ba nk
5
Your device comes with a rechargeable lithium
Type- C