Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
The LED lightstrip
nected using a connection lead
(Fig. B) or without a connection lead
(Fig. C).
Mounting the product
on a cupboard
Note: Thoroughly clean the surface
on to which you intend to install the
product. The surface must be clean,
dry and free of grease. Otherwise
the self-adhesive tape
stick properly.
1. Using a pencil, mark the position
on the cupboard, shelf or cabinet
on to which you intend to attach
the LED lightstrip
sary, use a spirit level as a guide.
2. Stick the double-sided adhesive
tape
. Then pull the paper from
1
the self- adhesive tape
back of the LED lightstrip
3. Position the self-adhesive tape
on the markings and press
9
to fix it firmly into place (Fig. D).
4. Connect the LED lightstrip
to the mains adapter
or connect the LED lightstrip
to the connection lead
connect it to an additional light-
strip (Fig. B).
1
onto the LED lightstrip
9
can be con-
may not
9
. If neces-
1
on the
9
1
(Fig. F)
8
2
GB
2
.
1
1
to
13
Werbung
