CASO DESIGN Touch 2000 Original Bedienungsanleitung Seite 40

15.4.3 Temperature Mode
 Press the
Select button until signal lamp Temp lights up to select the temperature
mode. The preset temperature stage "180°C" is shown in the display.
 With the the
from 60 – 240°C. (Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220,
240 °C).
 Please note that the two functions of level (power) and temperature can be chosen as
alternative. You can either work with the power levels or with the temperature stages.
The most recently selected function is active.
 The temperature is measured by a sensor below the glass ceramic plate, therefore the
displayed temperature can deviate from the temperature in the pot.
► When you fry with very little fat the temperature in the pot bottom rises very rapidly, for
frying turn to temperature mode. Here, the maximum temperature is 240 ° C.
15.4.4 Timer

Timer Function. Press the
display shows "0". With the the
time in 1-minute intervals (up to max. 180 minutes). Once the time is up, an acoustic
signal sounds and the device automatically goes into standby mode.

The display shows alternately the selected function level (power) / temperature temp
or the timer. The corresponding lamp lights upt.
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
15.4.5 Max/Min- function
 Press
15.4.6 Child-proof function
The child-proof function prevents children from using the device without supervision.
Press the
In the locked state, all the buttons (except On/Standby, and
disabled.
buttons, you can change the settings at any time in a range
Please note
Select button until signal lamp Timer lights up. The
Please note
button to switch the powerlevel to maximum or minimum.
buttons together and "LOC" is displayed.
buttons, you can now select the operating
buttons) are
40