Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Warning
► In order to prevent overheating do not place any metal foil or metal panels on the
appliance surface.
► Do not touch the hot surface of the ceramic hob. Although the induction cooktop itself
does not produce any heat during the cooking process, the temperature of the
cookware does heat up the hob.
► Keep the hob and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the hob, this liquid can vaporise and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.
15.4 Operating the Appliance
15.4.1
Switching On
Plug the power plug into a suitable outlet.
Display lights up briefly, and then the device switches to standby mode.
Is the temperature of the surface of the induction cooker lower than 50°C, the display
shows „L". When the temperature of the cooker plate surface is over 50 °C, it is
displaying „H".
Place a suitable cooking pot with its contents to be cooked on the centre on the hob (Ø
120 mm - 240 mm).
Now press the
On/Standby lights up. The signal lamp Power is blinking.
15.4.2
Power Mode
Press the
Select button. The signal lamps On/Standby and Power light up. The
preset power stage "1200" is selected and the device turns on. With the
buttons you can change the settings in a range from 200 – 2000 W.
► We recommend to select the function "Power Mode" with 200-2000 W in case of
cooking similar to conventional stove.
Please note
On/Standby switch to turn on the device. The signal lamp
Please note
39
Werbung
