HP OneShred Auto 80CC Bedienungsanleitung Seite 17

Top "Access Panel 1":
3
Pull the material out of the shredder.
If further access is necessary in order to clear the paper jam, you can open the bottom "access
panel 2" to gain access to the cutting mechanism.
You can only open the bottom "access panel 2" when the top "access panel 1" is already open.
4
Open the bottom "access panel 2" by moving the two access pins inwards, towards each
other, and raising the access panel.
Bottom "Access Panel 2":
5
Pull the material out of the shredder.
Î You have cleared the paper jam.
After you have cleared the paper jam, check and ensure that the top "access panel 1" and
bottom "access panel 2" have been returned to their original, locked position.
Paper Jam in the Manual Infeed
1
Slide the On/Off sliding switch to the "Rev" position.
2
Pull the material out of the shredder.
Î You have cleared the paper jam.
- 17 -
EN