Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connections and controls:
No.
Designation
1
LEDs
2
LCD-Display
3-7
Menu-Buttons
8
IR-Sensor
9
Safety-Eye
10
Power In (IEC)
Intended use:
The LightmaXX Nano Truss Light Mobile MKII was designed for use as an electronic LED
lighting effect. The device may only be used for this purpose and in accordance with the operating
instructions. Other purposes as well as operation under other operating conditions are expressly
not intended and can lead to damage to property or personal injury! No liability is assumed for
damage resulting from improper use.
It must be ensured that the device is operated exclusively by trained and competent users who are
in full possession of their mental, physical and sensory abilities. The use of other persons is
expressly only permitted at the request of a person responsible for their safety, who instructs or
supervises the use.
All connections of the device should be made before switching on. Only use high-quality cables
that are as short as possible for the connections.
No.
Designation
7
Power Out (IEC)
8
Switch on/off for Battery operation
9
Power-Switch on/off
10
Mounting Point
11
DMX In (3pol XLR)
12
DMX Out (3pol XLR)
ENGLISH
Werbung
