COMPACT 3.0
• Reprogramme the remote control.
• Replace the remote control's battery and reprogramme.
• Replace electronic control.
• Replace the remote control.
!
(If the error persists, contact the Authorised Technical Service).
• Take down the interior air distribution panel and correctly connect the electronic
control and control panel connection cable.
• Position the unit with a slant of less than 45º (The unit should not work with a slant
of 45º or over as it may result in damage in the compressor). The electronic control
detects the slant, meaning it must also be less than 45º.
• Clear the valve and wastewater pipe obstruction (Remove the outer cover of the
unit for access).
• Replace the EPDM seal (take down the unit and thoroughly clean the surface
where the EPDM seal is to be attached).
• Seal the wire output in the blower and evaporator cabin cover (Remove the unit's
outside cover for access).
All manuals and user guides at all-guides.com
Solution
23
EN
®