Remote Control - LD ROADMAN 102 Bedienungsanleitung

REMOTECONTROL:
The Roadman 102 is equipped with two remote-controllable infrared receiver modules, one on the front and one on the
back of the unit. This allows you to use the remote control both in front of and behind the speaker.
1
PWR (POWER): On/Off switch
USB: Select the USB interface.
2
SD: Select the SD-card interface.
3
DISC: Select the CD-ROM drive.
4
SKIP (LEFT/RIGHT): In Play mode you can select
5
the previous/next track using the SKIP-buttons
(LEFT/RIGHT).
In Play mode, holding down the SKIP-buttons acts as
Fast Forward (Fast Forward, right SKIP-button) or Fast
Reverse (Fast Reverse, left SKIP-button) within a track.
VOL +/- : Volume level. Press the Plus button (+) to
6
increase the volume and Minus (-) to decrease it.
PLAY/PAUSE
7
STOP
8
RPT (REPEAT): Press button once to repeat the
9
current track. Press button twice to repeat all tracks.
10
7
7
10
10
1
1
2
2 USB
STOP
PROG SHUF
3
3 SD
FOLDER
4
4 DISC
5
5
14
14
8
8
9
RPT 9
11
11
12
MUTE
12
13
13
6
6
PROG (PROGRAM) Programming your own play
10
sequence of tracks on CD, USB memory stick and SD
card. As soon as you press the PROG button, "PROG"
appears on the display above the track run-time, and
the track number indicator flashes. Select the track
number by using the VOLUME control for the first
program item and confirm your selection with SHUF
Repeat this process to create a program. The
program will be launched automatically.
SHUF (SHUFFLE): Random playback
11
MUTE: Mute
12
13
FOLDER:
In Play mode, use the FOLDER buttons (LEFT/RIGHT)
to select the first track of the previous/next folder.
EJECT: Eject CD
14
09 09