Product Overview; Intended Use; Using The Appliance - for_q FQ-ARM 4038 BASIC Bedienungsanleitung

Product overview

1 Safety button
2 Lower on/off trigger
3 Upper locking lever
4
Safety flap
5
Lower locking lever
6 Main handle
7 Battery cover
8 Wheel
9 Handle
10 Upper on/off trigger
11 Upper handle
12 Lower handle
13 Collection bag
14 Height adjustment lever
15 Cutting blade

Intended use

The appliance is intended for mow-
ing grass and lawn areas in private
outdoor environment, with less than
50 hours of use per year. The appli-
ance is not intended for commercial
use.
Any other use (e.g. trimming or
mowing of bushes, hedges, climbing
plants, roof gardens or balcony box-
es, as well as chopping, shredding
or cultivating) or modification to the
appliance is considered as improper
use and could cause considerable
dangers.
COLLECTION BAG
1
Connect the two lower units of
the collection bag 13, then at-
tach the collection bag lid.
EN
102

Using the appliance

Caution! Before start using
the appliance, check the
blades and fastening elements for
damage. Do not use the appliance
if it is damaged.
1. The appliance is equipped with a
safety switch. In order to switch
the appliance on, press and hold
the safety button 1, tilt the appli-
ance backwards, pull the on/off
triggers 2 or 10 and release the
safety button 1.
2. Keeping the on/off triggers 2 or
10 pulled, wait until the appliance
has reached full speed.
3. Place both hands on the handle 9,
return the appliance back to the
ground, and slowly start pushing
the appliance forward.
4. Start mowing in parallel lines. For
a better result, repeat the process
in a 90° angle.
5. To switch the appliance off, re-
lease the on/off triggers 2 or 10.
Wait until the blade has come to a
complete stop before proceeding
with further actions.
2
Turn the collection bag 13 up-
side down and install the two
collection bag screws.